Snap Action Thermal Controls
Quick Make / Quick Break thermal protectors. All can be customized to help you cut production costs while improving performance and safety in your particular application.
Model F Series
Snap action thermal protector for use on 120, 240, and 277 VAC applications. Perfect for use in motors & transformers.
Valstat Series™, ultra small snap-action thermal controls with drawn metal housing.
Model FC-P2D Series
Valstat Series™, ultra small snap-action thermal controls with plastic housing.
Model FC-P6D Series
This shunted snap action thermal control is a new addition to the Valstat™ Series of economical solutions for protection in motor, transformer, lighting and other applications.
A high-limit single operation device designed specifically for DC applications.
Model H-3, H-4, H-5
These unique devices provide ultra fast thermal response times. Can be used up to 10 amps 250 VAC loads.
These Snap Action Thermostats operate as a high limit, single operation (non-resettable) type control. Can be used up to 260ºC.
The ceramic case allows them to operate at temperatures up to 280°C. Can be used up to 15 amps/125 VAC and 10 amps/250 VAC.
Model J Series
Snap action thermal protection with exceptional versatility. For use on 120/240/277 VAC loads. Various bimetallic elements available.
Model J (A)
Snap action thermostat for use on 120/240 VAC loads. Perfect for personal care appliances and other heated applications.
Model JC Series
Valstat Series™, economical low profile snap-action thermal control with fold over case design.
Valstat Series™ self-hold thermal protector opens circuit, holds until power is removed, then when unit cools, resets allowing continued operation.
Model J (S)
Snap action, self-hold thermal protector opens circuit, holds until power is removed, then when unit cools, resets allowing continued operation.
Snap action single operation thermostat functions like non-resettable type control.
Snap action devices available with customized brass or stainless steel probe housings.
Models V & VA
Snap action thermal protector in ultra-small plastic case. Low internal resistance. Beveled edges fits neatly between battery cells in rechargeable packs.
Model VS Series
The Model VS Series snap action thermal protectors feature a shunted design so the bimetallic element does not carry the circuit current, enabling them to carry larger currents than the conductive Model V protectors.
Model W Series
Snap action thermal protector with highest contact rating of any PEPI device. For use on large motors, transformers and battery chargers.
Model 11 MP Series
High-value, small footprint snap-action thermal protectors.
Models KO, KS, CO & CS
Snap action devices with automatic reset at preset temperature.
Models KB & CB
Snap action devices with manual activated reset.
Models SO & CSO
Snap action devices with integrated heat source to prevent device from resetting until line voltage is removed from application.
Model ST01 Series
Designed as an economical solution, especially for motor, transformer, and lighting applications up to 5 amps 250 VAC. The round, low-profile design fits neatly into small spaces.