(Click here for the Current Derating Curve chart)

Metric Dimensions are shown in mm (Shown in grey)
Copyright 2005, Portage Electric Products, Incorporated, All rights reserved.

Standard Marking System
(Click Here)

Portage Electric Products is offering a new series of economical snap-action thermal protectors designed for a cost effective solution for protection in motor, transformer and lighting applications. Available with various bimetallic elements to match the current sensitivity of the device to the application.

Features

• Snap-action design, quick break/quick make switching action.
• Ultra compact design with a high switching contact rating.
• Conductive bimetal construction: The bimetal carries the circuit current for maximum sensitivity under short circuit conditions.
• Heat resistant PBT plastic case.
• Preset calibration temperature, not adjustable in the field.
• Available in a low and high bimetal resistance for optimum current and temperature sensitivity.
• Suitable for vacuum impregnation processes.
• Stocking programs available.

Contact Ratings

• 12 AMPS/24 VDC
• 12 AMPS/125 VAC
• 8 AMPS/250 VAC
  These ratings are applicable for 6,000 cycles
• UL & C-UL File No. E42562
  UL 2111 Standard and CSA C22.2 No. 77-95

Calibration Temperature Range

• Available with nominal temperatures from 50°C to 130°C. In 5°C increments with a standard Tolerance of ±5°C
• Reset temperature approximately 70% of no-load opening temperature

Standard Configuration

• FC-P2D Protectors are equipped with two 100mm wires stripped 9.5mm #20 awg. UL 3266 White XLPE (Irradiated) 300V 125°C

Model FC-P2D-XXX
Other configurations available, contact factory for further information.

(Printable Version) (Download .PDF)

Click the banner for Adobe
Acrobat Reader